• Optical Fiber Identifier

Economic Type Optical Fiber Identifier MW0300D

Optical Fiber Identifier is an important tool for optical maintenance, which is used for nondestructive fiber identification project. Meanwhile it also has Visual Fault Locator module with fault location function.

Using the macro bending technology on line for nondestructive testing, Optical Fiber Identifier can measure the signal direction and power and avoid error operation resulting in interrupted lines.

Optical Fiber Identifier is an important tool for optical maintenance, which is used for nondestructive fiber identification project. Meanwhile it also has Visual Fault Locator module with fault location function.

Using the macro bending technology on line for nondestructive testing, Optical Fiber Identifier can measure the signal direction and power and avoid error operation resulting in interrupted lines.

---Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Do not damage optical fiber without interrupting communications and direct detection of 25mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper.

---Tone identification, Optical Fiber Identifier can detect optical signals in the tone signal a fixed load, 270Hz, 1KHz and 2KHz, to identify a specific optical fiber, can quickly find the necessary fiber.

---Build in VFL function. The output power of Optical Fiber Identifier is 10 mw.

---Low battery monitoring function, when battery power is insufficient to issue instructions to remind users to change batteries.

Wave respond

800nm-1700nm

Pass through insertion loss

1. 250umOptical fiber

2. 900umOptical fiber

3. 3mmOptical fiber

1. 1.0dB

2. 1.0dB

3. 2.0dB

Application of optical fiber

250um/900um/2.5um/3mm Optical fiber

Identified Signal Type

270HZ/1KHZ/2KHZ

Identification of modulated signals

Yes

Power Measurement

Yes

Display

LED segment

Tone

Yes

Low power monitoring

Yes

Detector type

1mm InGaAs

Minimum detection power

Test conditions:

250umOptical fiber

900umOptical fiber

3mmOptical fiber

Test conditions:

250umOptical fiber

900umOptical fiber

3mmOptical fiber

1550

-35dBm

-35dBm

-30dBm

1310

-30dBm

-30dBm

-25dBm